Browse Products
Colour
Featured Product
Quality First
To assist the bodyshop to keep
pace in this ever changing environment De Beer have developed a state of the art program designed to give the bodyshop the tools required to keep ahead of the game and enjoy continued and higher levels of success.
- Home
- Products Range
- 2K Topcoats
- 3000 Series BeroThane HS420
3000 Series BeroThane HS420
Over a decade ago, De Beer Refinish launched its VOC compliant product range throughout Europe. Since then it has evolved into a complete compliant program including Waterborne and High Solids Technologies.
- Home
- Products Range
- 2K Topcoats
- 3000 Series BeroThane HS420
3000 Series BeroThane
The 3000 HS420 Series has been specially developed for both automotive and fleet. It is a VOC compliant High Solid Polyurethane mixing system that is suitable for all applications combined with different hardeners. Beside easy application and good coverage, the system has excellent chemical resistance, high gloss and outstanding durability. The VOC-compliant range was developed by our Research & Development laboratory in Lelystad, where production also takes place. Valspar bv is ISO 9001 and ISO 14001 certified and stands for excellent quality, good products, reliable distribution and outstanding commercial and technical support. And the efficiency doesn’t stop there! Using carefully selected pigments, De Beer Refinish has limited the number of mixing colours to 16, which has nevertheless resulted in an optimum colour range. Fewer mixing colours mean lower investments, less stock and increased turnover time. The colour formulas are available on CD-ROM (ICRIS) and via our website.
Comparisons of VOC MS v’s HS
VOC’s are measured by how many grams/per litre of solvent compared to solid content in a product. Since the introduction of the European Union of VOC directive 2004/42/EC, as of 1st January 2007, manufactures are restricted to selling VOC compliant products to all EU countries. EU guidelines on Single Stage Solid Colour and Clear coats are not to exceed 420g/per ltr VOC ready to use.
Application Comparison: 3000 BeroThane HS420 v’s Conventional MS System
Designed as a very labour cost efficient finish, with a light coat followed by a full wet coat without any flash off required. This will greatly improve productivity and reduce down time. Using carefully selected pigments, the 16 mixing colours result in an optimum colour range. Fewer mixing colours means less stock & lower investments for maximum efficiency.
| Area of application | Passenger cars, commercial vehicles, equipment, etc. |
| Chemical base | High quality two-component polyurethane resin. |
| General qualities | High gloss, non-yellowing 2-pack finish. |
| Auxiliary materials | 8-30/8-40/8-50/8-60 HS420 Hardener. 8-181 HS420 Special Thinner. 1-065 2K Structure Coat Coarse. 47-39 2K Elastic (for plastic parts). 30-49 HS Matting Agent. |
| Mixing ratio (Vol.) | 2:1 with HS420 Hardener + 15% 8-181. |
| Substrates | Combined with suitable primer on cured old coatings, steel, galvanized steel, aluminium and polyester. On plastic parts: first plastic primer, followed by a layer of HS Primer/Surfacer with 2K Elastic. |
| Undercoats | 8-145/8-14510/8-14540 HS Surfacer. 8-149 HS Tinting Surfacer. 1-7510/1-7520 Epoxy Primer. |
3000 Series (TDS)